The latest generation of revolutionary mixing technology!






Mixer D10-III is the consistent development of our D10 mixer and once again attracts attention for its improved cleaning and mixing features. Thanks to the experience gathered with its tried and tested forebear, the D10, it has been possible to further optimize the D10-III for the demands of modern building sites. Thus, in addition to the processing of classic dry mortar products with granularity of up to 4 mm, it is also specially developed for fine-grained products with a high proportion of synthetic material, such as adhesives, bedding and leveling compounds or dry synthetic, silicate or silicon renders.


In order to cope with this wide range of products, the mixer uses our patented mixing principle, ensuring the best possible blending of the material. 

 
Mixer D10 is available in a 400 V or 230V version. In the 230V version, a frequency converter (FU) ensures the motor kept under powerful control.




Our patented mixing principle:
The D10 can process all standard dry mortar products up to a granularity of 4 mm. The technical highlight of the D10 is the transfer of material from the dosing area to the mixing area: the water is no longer sprayed onto the material as in the past, but instead the material is dosed according to a patented mixing principle, scattered into a tank of water and mixed.


                                       
EasyClean
The use of PU components makes cleaning easier and means less caking than with similar metal components. The result: quick, residue-free cleaning.


 EasyWork
Uninterrupted operation with consistent mixing quality thanks to our intelligent machine technology. The separation of dry and wet areas enables a permanent constant ratio of dry material to water to be achieved.

                                                               
  EasyMix
Our patented mixing system enables an extremely good mixing quality. In conjunction with the large mixing volume, the system guarantees the best possible blending, even with modern dry mortars.



EasyUse
Well-organized controls, easy dismantling and maintenance and an intelligent transport solution combine to make the D10 very easy to handle.
                                                            

EasyLife

A combination of modern materials and our patent mixing system increase service life and extends service intervals.




Specifications:

Delivery volume: standard approx. 15 l/min (depending on the transport and mixing shaft)
Drive motor: 2.2 kW, 230/400 V, 50 Hz
Electrical connection: 230/400 V, 50 Hz, 1/3 ph
230/400 V, 50 Hz, 1/3 ph 16/10 A
Connecting cable: 3 x 2.5 mm² / 5 x 1.5 mm²
Connector: Domestic socket/ 16 A, 5p, 6h
Water supply: 3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions: approx. 1700 x 440 x 470 mm
Weight: approx. 85 kg





Our specialist for:                                                                                 

  • adhesives dry
  • bricklaying mortar
  • cement plasters
  • concrete
  • decorating plaster
  • enriched special mortars
  • fine concrete
  • finishing plasters
  • grout
  • lime cement plaster
  • lime gypsum plaster
  • lime plaster
  • loam products dry
  • reinforcing and adhesive mortars
  • restoration plaster
  • structured and decorative renders
  • thin layer gypsum and cement products




D10: facts
Areas of use and applications
All dry mortars, such as:
• Reinforcing mortar and adhesive mortar
• Thin layer filling compounds
• Finishing plasters
• Decorative and structured renders
• Lime gypsum plasters
• Cement plasters
• Lime plasters
• Lime cement plasters
• Concrete fillers



Recommended accessories

Dry material probe
Transport screw
Protector to prevent dry running
Stand with filling hopper




Product added to wishlist
Product added to compare.

By continuing to use the website, you agree to the use of cookies.