The powerful silo mixer!

With a conveying performance of 100 lt/min or 150 lt/min, mixer D100/D150 is certainly powerful. It is designed to process dry mortar products with a granularity of up to 6 mm and is found on numerous building sites throughout the world. The D100/D150 optimizes the processing of bricklaying and insulating mortar, plasters, screeds or fine concrete.

Fitted with a powerful 5.5 kW or 7.5 kW drive engine it mixes even heavy products with ease. The direct mounting on the silo creates a compact unit that speeds up work on the building site whatever the weather.

As is typical of all m-tec systems, the D100/D150 has easy and quick to use connector systems that enable important elements, such as the mixing chamber or mixer motor, to be replaced in just a few seconds.

The m-tec S100/S150 control panel is the control unit for mixer D100/D150. It can cope with every situation and a number of different versions are available in line with the performance of the continuous mixer. Starting from a hand-operated, economical basic model and ranging to a fully automatic version with remote control, timer and special control, the m-tec S100/S150 control panels meet every challenge a modern building site can produce.

Well-organized controls, easy dismantling and maintenance combine to make the D100/D150 very easy to handle.


Tried-and-tested solid steel components ensure a long service life and easy maintenance.


Our Specialist for:                                                                                    

  • bricklaying mortar
  • cement plasters
  • cementitious self- levelling
  • concrete
  • fine concrete
  • finishing plasters
  • floor screed
  • grout
  • lime cement plaster
  • lime gypsum plaster
  • lime plaster
  • loam products dry
  • self levelling products


  • Construction chemicals
  • Rendering
  • Flooring
  • Masonry

recommended accessories*

  • Control panel S100/S150
  • Transport screw

*for reference only.

Specifications   D100 D150

Standard conveying volume                               

 approx. 100 l/min (depending on the transport and mixing shaft) approx. 150 l/min (depending on the transport and mixing shaft)                                                                  
Drive engine: 7.4 hp - 5.5 kW 7,4 hp - 5.5 kW / 10hp - 7.5 kW
Electrical connection: 400V, 50 Hz, 3 ph 400V, 50 Hz, 3 ph
Fuse:  16Α  16A
Connecting cable: 5 x 2,5 mm² 5 x 2,5 mm²
Connector: 16A, 5p, 6h 16A, 5p, 6h
Water supply: 3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running 3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions: 2300 x 380 x 350 mm 2350 x 400 x 350 mm

Weight: approx. 150 kg approx. 150 kg

Product added to wishlist
Product added to compare.

By continuing to use the website, you agree to the use of cookies.