Faster! Higher! Further!
As a powerful unit, the m-tec F100/140 pneumatic conveyor system with pressure silos set standards for the feeding of application devices, such as the duo-mix mixing pump.
Even over the long distances found on large building sites or in multi-storey construction projects, the F100/140 can be used for the pneumatic conveyance of all typical premixed dry mortar products - in particular interior and exterior plaster, but also bricklaying mortar.
The F100/140 does away with the need for the time-consuming unloading, carrying, opening and emptying of bagged material because it transports the product through its sealed system directly from the silo to the application machine. A continuous material flow and very high conveying performance are just as much taken for granted as a rational, clean way of working. The tried-and-tested conveyor system needs no intervention from personnel when it comes to the continuous feeding of processing machinery.
As a very well equipped version, the F100+/F140+ offers the conveying system a fully automatic mode that has rational details such as the monitoring of the rotational direction or automatic emptying of conveying hoses in addition to features such as silo monitoring and regulation.
Conveyor system F is available in a portable version, a mobile trailer-mounted version or as a block conveyor system mounted on the silo.
The numerous applications for dry bulk materials and compatibility with all standard plastering machines or continuous mixers make work easy.
Together, the clearly laid out controls, automatic compressor deactivation and compact conveyor block make the F series system easy to use.
The use of an oil-free claw compressor increases service life and reduces the need for replacement parts.
Automatic silo pressure monitoring
Control of silo pressure by the compressor, which can regulate pressure to a set ideal value if necessary
Automatic conveying pressure control
Automatic detection of the state of the material in the delivery hoses - regulation in critical situations by blowing the hoses free
Automatic emptying of delivery hoses
In the event of a power failure, fully automatic utilization of the available air in the pressure silo to blow the delivery hoses free.
Operating hours counter
Integrated in the control panel to monitor maintenance intervals
Rotational direction monitor with warning lamp
Ensures that the compressor runs in the correct processing direction
Areas of use and applications:
All dry mortars
• Machine gypsum plasters
• Lime gypsum plasters
• Cement plasters
• Lime plasters
• Lime cement plasters
• Bricklaying mortar
• Bulk materials
• Powdered material
|Compressor:||approx. 100 m³/h||approx. 140 m³/h|
|Drive motor:||5.5 kW, 400 V, 50 Hz||7.5 kW, 400 V, 50 Hz|
|Electrical connection:||400 V, 50 Hz, 3 ph||400 V, 50 Hz, 3 ph|
|Fuses:||16 A||25 A|
|Connecting cable:||5 x 2.5 mm²||5 x 4.0 mm²|
|Connector:||16A, 5p, 6h||32A, 5p, 6h|
|Dimensions:||approx. 1050 x 550 x 650 mm||approx. 1050 x 550 x 650 mm|
|Weight:||220 kg||230 kg|