GIOTTO airless - the No1

a very powerful and easy to use airless electrical membrane pump designed for spraying all products used in buildings, metal constructions, injections etc with maximum flow rate 8 lt/min

Motor:Single phase
Volt230V / 50Hz
Power:3ΗΡ - 2,2kW
Weight:45 kg
Maximum Pressure:250 Bar
Max tip size:.031''
Flow rate:8 L/min

Value for money and quality

The GIOTTO can take up to 90 m of hose, spraying with .031 '' nozzle viscous materials with a constant pressure of up to 250 bar. It can also spray with two spray guns in parallel. It is designed to be easy to clean and maintain. 

Very powerful and practical airless electrical membrane pump designed for spraying all products used in buildings, metal constructions, insulation etc.

Can work with hose up to 100m, spray with noozle .031 '' high viscosity materials with maximum pressure up to 250 bar. 

Easy to clean and maintain.

Equipped with 2,4 hp single-phase brushless induction motor, diaphragm pump, high-pressure spray gun with in-line filter, replaceable spray tip, 15M high pressure hose.

This airless pump sprayer system is suitable for many kinds of colorant, varnish, lacker, medium to high viscosity water-based latex paint, primer, enamel,polyurethane base waterborne, colorant, stains, acrylic, emulsions, varnish, etc. For large size indoor / outdoor wall painting, decoration, construction, etc The spray equipment can be used for both water-based and oil-based painting

 

Products : Acrilic, Plastics, Sealants, Varnishes, Primers, Water based, Thixotropic products, Latex, Industrial epoxy, not abrasive paints

1 + 1 years factory and espray warranty!!

DALI AIRLESS 

Dali is a powerful airless electrical membrane pump designed to spray products used in buildings, metal constructions, insulation, injections etc.

Motor:Single phase
Volt230V / 50Hz
Power:2ΗΡ - 1,5kW
Weight:35 kg
Maximum Pressure:250 Bar
Max tip size:.025''
Flow rate:4 L/min

Power and quality

Dali is a powerful and easy to use airless electrical membrane pump designed to spray products used in buildings, metal constructions, insulation, injections etc.


Suitable for plastics, acrylics, water insulators, varnishes, varnish paints etc. Ideal for materials with low to high viscosity such as water colours, solvent, nitro, xylene, gasoline, etc.

Dali can take up to 50m hose, spraying with .025 '' noozle with a constant pressure up to 250 bar. It is designed to be easy to clean and maintain.

1 + 1 years factory amd espray warranty!!

MIRO AIRLESS

Miro is a small powerful airless membrane pump suitable for water, solvent, nitro, xylene products etc. with low to medium viscosity.

Motor:Single phase
Volt230V / 50Hz
Power:1ΗΡ - 750W
Weight:25 kg
Maximum Pressure:250 Bar
Max tip size:.021''
Flow rate:2,2 L/min

Great value in a small format

Miro is a small, very powerful and easy to use airless electrical membrane pump suitable for spraying all products for buildings, metal constructions, carpentry, etc. with adjustable pressure up to 250 bar.

Easy to carry with only 25kg, easy to use and to clean.

Miro can spray from 10kg to 500kg per day with no problem and save the day ! A professional solution with high standards materials. 

What is airless membrane pump?

    • WORKING PRINCIPLE

      The airless electric diaphragm pumps are used for high pressure paint spraying without atomising air . The pump is operated by an electric motor, or petrol engine, that transmits its rotating action to an eccentric connected to a piston dipped in an oil chamber. The piston with its alternate action sucks the oil pushing it in pressure against the diaphragm, made by an highly elastic and resistant material , that vibrates with the same frequency as the piston. This action creates a depression : the product is sucked and pushed by the diaphragm itself , towards the hose, to the airless spray gun. A dedicated valve adjusts the pressure of the oil circuit and the pressure of the product itself.

      WORKING ADVANTAGES

      - The hydraulic system controls the pressure counterbalancing any drop
      - Suitable to a wide range of product’s applications, from low to high viscosity
      - Pressure and spraying angle constant during the operation of the pump
      - Special diaphragms and high quality materials to avoid wearing providing    long lasting performances
      - Very easy spraying, cleaning and servicing operations
Product added to wishlist
Product added to compare.

By continuing to use the website, you agree to the use of cookies.