In 1965, as one of the first, the German company Mathis Kalkwerk, owner of the famous dry mortar brand maxit, started to introduce mixing pumps and plastering machines for the processing of pre-mixed construction products. Just a couple of years later the first silo for transporting industrial dry mortar was developed. To meet the growing demand in machine technology, in 1978 Mathis Kalkwerk founded the m-tec mathis technik gmbh (well known as m-tec), located in the southwest of Germany. In the following 4 decades, m-tec became the today’s global player as designer and manufacturer of almost any kind of technology in the fast growing dry mortar industry. Today m-tec machinery can be also found in many other bulk solid applications. Numerous foundations of subsidiaries in major markets such as 1993 in Czech Republic and in 2005 in China testify the successful expansion of the company. In all these years, m-tec has confirmed many times its unique ability to innovate. More than 100 patents and utility models and the reputation as leading innovator in technology and as provider of individual system solutions are proof of this. Many technical innovations which m-tec has implemented over the decades can still be considered as milestone both in job site machinery as well as in plant equipment & engineering.

Pumps.

Speedy-MP

TDS
Standard delivery volume:approx. 0.5 – 12 l/min continuously adjustable, (depending on the worm pump)
Conveying distance:*up to 10 m
Delivery pressure:*up to 20 bar
Drive motor:1,8 kW, 230 V, 50 Hz
Electrical connection:230 V, 50 Hz, 1 ph
Fuse:16 A
Connecting cable:3 x 2,5 mm2
Connector:16A 3p 6h
Dimensions:approx. 1100 x 500 x 600 mm
Weight:approx. 41 kg

* Depending on consistency, quality and composition of the material, pump model and condition, diameter and length of the delivery hose and also the pumping height of the material.

Information

The m-tec Speedy-MP is an easy-to-handle pump with 30lt tank for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative decorative materials, fillers, key coats or primers.

The Speedy MP is lightweight and easy to use, it has a wide range of spare parts depending on the material we apply.

EasyClean

Easy, fast cleaning thanks to the use of non-rusting stainless steel.

EasyUse
Together, clearly structured controls, a compact and lightweight design and large wheels make the speedy-MP easy to handle.

Areas of use and applications.

All pumpable dry mortars, such as: Decorating materials, Structured and decorative renders, Lime gypsum plasters, Cement plasters, Lime plasters, Lime cement plasters, Finishing plasters, Soft materials, Flowing fillers, Thin layer filling compounds
Scope of delivery
speedy-MP pump incl. pump motor, material container, air fittings, mortar and air hoses, spray gun.

For details please contact your local sales representative or dealer.

Recommended accessories:
Compressor, remote control cable, bag mangle, mounted hopper, fine plaster spray gun.

Applications
  • Construction chemicals, Rendering, Flooring, ETICS, Plastering, Renovating.

P-20

TDS
Standard delivery volume:approx. 3 – 22 l/min continuously adjustable, (depending on the worm pump)
Conveying distance:*up to 50 m
Delivery pressure:*up to 30 bar
Max Grain size4mm
Drive motor:4 kW, 400 V, 50 Hz
Electrical connection:400 V, 50 Hz, 1/3 ph
Fuse:16 A / 32Α
Connecting cable:5 x 4,0 mm²
Connector:16A 3pol 6h / 32 A, 5 p, 6 h
Dimensions:approx. 1400 x 650 x 540 mm
Weight:approx. 95 kg
Information

The m-tec P20 is a compact pump for processing soft materials or pumpable products with a granularity of up to 4 mm. The P20 is mainly used to pump basic, decorative, synthetic resin and silicate renders, adhesive and reinforcing mortars, fillers or key coats.
Pump P20 is fitted with a frequency converter (FU).  This guarantees a powerful drive. In addition, this also enables output to be regulated continuously, so that it can be adjusted to the various products. Naturally the P20 has connections for operation with a compressor and for fully automatic feeding by means of a mixer.

EasyPump
The use of a frequency converter enables the pump motor to be started at full power and permits a continuously adjustable output.


EasyUse

Together, clearly structured controls, a compact and lightweight design and tensioning wedges make the P20 easy to handle.

Areas of use and applications
All pumpable dry mortars, such as: adhesives wet, cement plasters, cementitious self- levelling, decorating plaster, lime cement plaster, lime gypsum plaster, lime plaster, loam products wet, paste-like mortar, paste-like synthetic renders, reinforcing and adhesive mortars, self levelling products, structured and decorative renders, thin layer gypsum and cement products.

Applications
  • Construction chemicals, Rendering, Flooring, ETICS, Plastering, Renovating.

P-50

TDS
Standard delivery volumeapprox. 30 – 110 l/min (depending on rotor/stator and version)
Conveying distance:*up to 120 m
Conveying height:*Conveying height:*
Conveying pressure:*up to 30 bar
Drive motor:5.5 - 8.3 kW, 400V, 50 Hz
Electrical connection:400 V, 50 Hz, 3 ph
Fuse:25 A / 35 A
Connecting cable:5 x 4,0 mm²
Connector:32 A, 5 p, 6 h
Water supply:3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions:approx. 2100 x 590 x 620 mm for machine with big hopper and 9.2 kW drive
Weight:approx. 110 - 170 kg

* Depending on consistency, quality and composition of the material, pump model and condition, diameter and length of the delivery hose and also the pumping height of the material.

Information

The m-tec P50 is a powerful mortar pump for conveying all pumpable product with a max grain size up to 8 mm. Therefore the P50 is the perfect machine for processing mortars, concretes, plasters as well as self leveling compounds and floor screeds. The P50 is available in different designs suitable for the different applications with an output up to 110 l/min. 


The constructive concept of the m-tec P50 leads to “siteadapted” machine configurations, which allow the optimal performances for each individual application process. Two sizes of hopper are available, 90 liters and 120 liters.

The latter can be optionally equipped with an additional agitator, which grants the perfect mixing quality also for the hardly mixable products. The m-tec P50 can be equipped with 5,5 kW, 7,5 kW or 8,3 kW power engine.
If requested, the drive speed can be controlled by an inverter. Thus, the pumping capacity can be easily adapted to the requirements of the jobsite.

The control panel, with clearly arranged components, is designed as a stand-alone unit, so that the pump itself can be easily cleaned even by mean of a high pressure cleaner. Moreover all the P50 variants are equipped with the “easy to clean” stainless steel hopper. Of course, the P50 is equipped with connections for operating with an air compressor and for the fully automatic feeding by a mixing unit. The big wheels enable smooth transport on site.

EasyPump.
The use of a frequency converter (optional) enables the pump motor to be started at full power and permits a continuously adjustable output.

EasyUse.
Clearly structured controls, longlife parts as well as big wheels are only some examples for the easy use of the P50.

Applications

Applications: Construction chemicals, Rendering, Flooring, Masonry, ETICS, Plastering, Renovating.

Mixing Pumps.

Mono Mix II SC

TDS
Standard output:up to 6,5 l/min (stage 4) variable with other worm pumps and retrofit kits
Conveying distance:*up to 15 m
Conveying height:*up to 5 m
Conveying pressure:*up to 20 bar *
Drive motor:3,0 kW
Compressed air supply:1,1 kW, approx. 230 l/min, 10 bar
Elecrical connection:230 V, 50 Hz, 1 ph
Fuse:16 A
Connecting cable:3 x 2,5 mm²
Connector:16 A 3 P 6 h
Water supply:3/4“ water hose with GEKA coupling, required water pressure min. 2.5 bar while the machine is running
Dimensions:approx. 1430 x 670 x 1150 mm
Weight:approx. 160 kg

Information

The long-term success story of our most reliable and efficient mixing pump mono mix was decisive for the development of the mono mix II SC It is the powerful and efficient mixing pump for the application of thin-layer plasters on rough and uneven surfaces, the application of thin-layer gypsum products gypsum plasterboard or products for the air-tight sealing of masonry.

Our Specialist for: adhesives dry, cement plasters, decorating plaster, gypsum plaster, gypsum-based skim coat, reinforcing and adhesive mortars, skim coat products, thin layer gypsum and cement products.

Recommended Accessories: Mortar hoses, Air hoses, Fine plaster spray gun, Rotors/Stators, Spraying device, glue gun, mixing shaft, pump end device, stator and rotor monostar.

Applications

Applications: Construction chemicals, Rendering, ETICS, Plastering, Renovating.

M-200

TDS
Standard delivery volume:ca. 13,0 l/min
(depending on worm pump)
Conveying distance:bis zu 15 m *
Conveying height:bis zu 5 m *
Conveying pressure:bis zu 25 bar*
Pump motor:2,2 kW
Compressor:1,1 kW ca. 230 l/min, 3,5 bar
Electrical connection:230 V 50 Hz 1 ph
Fuse:16 A
Connecting cable:3 x 2,5 mm²
Connector:16A 3P 6h
Water supply:¾“ water hose with GEKA coupling, required water pressure/min. 1.8 bar while the machine is running
Dimensions:ca. 1170 x 590 x 1060 mm
Weight:ca. 114 kg
Information

The M200 raises the processing of thin-layer gypsum products to the next level – thus the creation of e.g.  perfect plasterboard walls is child’s play. The M200 inspires by the lump-free dilution of gypsum products, especially for fillers. This brand new technology, enables a perfect finish of plasterboard in the shortest time. With a capacity of 0.5-2 m² per minute, the M200 clearly overshines manual processing of gypsum products.

Our Specialist for: adhesives dry, decorating plaster, gypsum plaster, gypsum-based skim coat, lime cement plaster, reinforcing and adhesive mortars, skim coat products, thin layer gypsum and cement products.

Recommended Accessories: extension hopper and vibrator, handles, water pump, starting tube, retrofit kit compressor MKG 400.

Applications

Applications: Construction chemicals, Rendering, ETICS, Plastering, Renovating.

Mono-Mix

TDS
Standard delivery volumeapprox. 5-20 l/min
variable with other worm pumps
Conveying distance:*up to 20 m
Delivery pressure:*up to 20 bar
Drive motor:3,0 kW
Electrical connection:230 V, 60 Hz, 2 ph
Compressed air supply:1,1 kW, approx. 250 l/min, 4 bar
Fuse:20 A
Connecting cable:3 x 25 mm²
Connector:Nema L6-20A, 3-pol
Water pump:TM61E, 230V 60 Hz
Water supply:3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions:approx. 1430 x 670 x 1.150 mm
Weight:approx. 160 kg
Information

The mono-mix is available in two versions: 230 Volt or 400 Volt. In the 230 Volt version a frequency converter ensures that optimum performance can be achieved at any time: this is a huge advantage on building sites with a 230V power supply, e.g. during refurbishment projects or interior work. 

The mono-mix is a compact, easy-to-use mixing pump and is perfectly suited to the processing of all machine-mixable interior and exterior plasters, as well as for adhesives and reinforcing mortar. The mono-mix can be used both with bagged material as well as soft materials.

The pump has four convenient output settings, enabling it to be adjusted to the relevant material. An optional after mixer is available for materials that are difficult to mix.

The transparent layout of the controls and the conscious avoidance of superfluous switches make for simple operation.
The large wheels mean that the mixer can be transported with ease at all times. In addition, the monomix can be dismantled into three troublefree components on the building site in just a few simple steps.

As is typical of all m-tec systems, the mono-mix has easy and quick to use tensioning wedges, enabling important elements such as the worm pump or material container to be replaced in just a few seconds.

EasyClean.
The simple but logical structure enables the mono-mix to be cleaned quickly.

EasyWork.

The powerful drive technology of the mono-mix ensures there is always enough power for challenging tasks, even in the 230 Volt version.

EasyUse.
Together, clearly structured controls, 3-way dismantling, easy transport by crane and large wheels make the mono-mix easy to handle.

Applications

Applications: Construction chemicals, Rendering, ETICS, Plastering, Renovating.

Duo-Mix

TDS
Standard delivery volume approx.22 l/min (depending on worm pump 5 – 60 l/min)
Conveying distance:up to 60 m *
Conveying height:up to 30 m *
Conveying pressure:up to 30 bar *
Drive motors
Conveying:3.0 kW, 400 V, 50 Hz
Mixing / Pump:5.5 kW, 400 V, 50 Hz
Compressed air supply:0.9 / 1.1 kW, approx. 250/360 l/min, 4 bar
Water pump:0.75 kW, approx. 60 l/min, 4 bar
Electrical connection:400 V, 50 Hz, 3 ph
Fuse:25 A
Connecting cable:5 x 4.0 mm²
Connector:32 A, 5p, 6h
Water supply:3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions: approx.1350 x 640 x 1,390 mm
Weight:250 kg / 260 kg

* Depending on consistency, quality and composition of the material, pump model – and condition, diameter and length of the delivery hose and also the pumping height of the material.

Informations

Excellent mixing and tremendous adaptability for a wide variety of materials are the key properties offered by the duomix. The reasons for this: The unique m-tec dual mixing system together with the patented mixing principle – together making a combination that no other mixing pump on the market can offer.

EasyHandle.
The duo-mix can be used as a mixing pump, continuous mixer or mortar pump. Together with the continuous regulation of output (with the duo-mix2000 only) you also get the functions only otherwise available with an entire fleet of machines.

EasyWork.
Our intelligent machine technology allows you to work without interruption and without consitency changes. The separation of dry and wet areas enables a constant ratio of dry material to water to be achieved.

EasyMix.
The particularly good mixing quality is made possible with our patented mixing system. When used in conjunction with double mixing, the system guarantees the best possible mix of mortar products.

EasyUse.
The particularly good mixing quality is made possible with our patented mixing system. When used in conjunction with double mixing, the system guarantees the best possible mix of mortar products.

EasyLife.
Thanks to the particularly long conveying distance that can be achieved, there is no need to waste time and effort relocating the duomix. Your gain: more effective working time.

Our Specialist for: 3D concrete printing, Adhesives dry, Bricklaying mortar, Cement plasters, Cementitiour self – levelling, Finishing plasters, Floor screed, Flowing screeds, Insulating plaster, Lime cement plaster, Lime gypsum plaster, Lime plaster, Reinforcing and adhesice mortars, Self levelling products.

Recommended accessories: Filter hood, Feeding hood, Rotors / stators, Mortar hoses, Adhesive gun, Fine plaster spray gun, Float finisher, Tools.

Applications

Applications: Construction chemicals, Rendering, ETICS, Plastering, Renovating.

M-280

TDS
Technical data M280 – 400V
Outputapprox 22l/min (max 50l/min depending on worm pump)
Conveying distance:*max 40 m
Conveying height:*max 20 m
Conveying pressure:*max 30 bar
Drive motors
Conveyor section:
Gear motor1,1 kW, 400 V, 50 Hz, 51 Upm
Mixing pump section:
Gear motor5.5 kW, 400 V, 50 Hz, 400 rpm
Air compressor:0.9 kW, approx 250 l/min, 4 bar
Electrical connection:400 V, 50 Hz, fuse: 25 A, connector: 32 A, 5 ph, 6 h,

connecting cable 5 x 4.0 mm², connecting value 17 A

Water connection:3/4“ water hose with GEKA coupling, required water

pressure/min 2.5 bar when machine running

Dimensions:approx 1545 x 636 x 1480 mm
Filling height for bagged materials:1100 mm
Weight:210 kg (excl accessories + compressor)
Informations

A modular design, the M280 presents impressive workmanship that is both lightweight and ideal for building site conditions. Specifically its ease of handling and m-tec reliability make the M280 the mixing pump for all applications. For instance, the M280 can process all inside and outside machine plasters with the utmost ease.

EasyClean.
A cleaning slide separates reliably the wet and dry sections. With the mixing chamber swivelled off, the system can continue running in “two-hand jog mode” until the hopper is empty. The result is a fast, efficient, and residue free cleaning of the machine’s mixing and pumping sections.

EasyWork.
The M280 presents an uncluttered array of controls for very easy operation.

EasyUse.
This makes easy work when machine products are processed.

EasyHandle.
The duo-mix has the same connections as the M280 and so can be fitted as an accessory to its filter and feeding hoods.

Our specialist for: Adhesives dry, Cement plasters, Cementitious self – levelling, Finishing plasters, Floor screed, Flowing screeds, Insulating plaster, Lime cement plaster, Lime gypsum plaster, Lime plaster, Reinforcing and adhesive mortars, Self levelling products.

Recommended Accessories: Rotors / stators, Mortar hoses, Adhesive gun, Fine plaster spray gun, Float finisher, Tools.

Applications

Applications: Construction chemicals, Rendering, ETICS, Plastering, Renovating.

M-330

TDS
Technical data M330
Standard delivery volume:approx. 24 l/min (depending on worm pump 6 – 47 l/min)
Pumping distance:*up to 50 m
Pumping height:*up to 30 m
Pumping pressure:*up to 30 bar
Drive motors
Dosing:2.2 kW, 400 V, 50 Hz
Mixing pump:4.0 kW, 400 V, 50 Hz
Compressed air supply:0.9 kW, approx. 250 l/min, 4 bar
Water pump:0.3 kW, approx. 40 l/min, 4 bar
Electrical connection:400 V, 50 Hz, 3 ph
Fuse:25 A
Connecting cable:5 x 4.0 mm²
Connector:32 A, 5p, 6h
Water supply:3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions:approx. 1650 x 640 x 1,470 mm
Weight:approx. 270 kg
Information

With its convincing technology, the M330 marks the start of a new generation of mixing pumps. The “trick”with this new technology is our latest patented mixing principle, which allows the material to be blended perfectly and also ensures permanent consistency of the material. This means that the pump does not have to perform any additional mixing tasks and can concentrate on its core function – pumping.

EasyClean.
The use of PU components makes cleaning easier and means less caking than with metal components. The result: quick, residue-free cleaning.

EasyWork.
Our intelligent machine technology allows you to work without interruption and without thick/thin variations. The separation of dry and wet areas enables a permanent constant ratio of dry material to water to be achieved.

EasyMix.
Our patented mixing system enables an extremely good mixing quality. In conjunction with the large mixing volume, the system guarantees the best possible mortar products.

EasyLife.
A combination of PU components and our patented mixing system dramatically increases the service life of the pump in comparison to other systems.

Our Specialist for: Adhesives dry, Cement plasters, Cementitious self – levelling, Finishing plasters, Floor screed, Flowing screeds, Insulating plaster, Lime cement plaster, Lime gypsum plaster, Lime plaster, Reinforcing and Adhesive mortars, self levelling products.

Recommended Accessories: Filter hood, Feeding hood, Rotors / stators, Mortar hoses, Adhesive gun, Fine plaster spray gun, Float finisher, Tools, Extended hopper.

Applications

Applications: Construction chemicals, Rendering, ETICS, Plastering, Renovating.

Mixer.

Flotti

TDS
Delivery volume:standard approx. 20 l/min (depending on the transport and mixing shaft)
Drive motor:1,3 kW, 230 V, 50 Hz
Electrical connection:230 V, 50 Hz, 1 ph
Fuse:16 A
Connecting cable:3 x 2,5 mm²
Connector:Domestic socket
Water supply:1/2“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions:approx. 1400 x 500 x 1000 mm
Weight:approx. 90 kg
Information

The flotti mixer is the economical entry level model of the m-tec continuous mixers and is a clever alternative to the drum mixer. The flotti mixer is used to process ready-mix dry mortars, such as bricklaying mortars, plaster and cement mortar, tile adhesive, anhydrite floor screed or decorative renders in a granularity of up to 4 mm.

The 230V motor means that the flotti can be powered using a typical domestic socket. The simple design means that the flotti can be cleaned very quickly.

The conscious avoidance of superfluous controls mean that the system is extremely intuitive. As is typical of all m-tec systems, the flotti has easy and quick to use connector systems that enable important elements, such as the mixing chamber, to be replaced in just a few seconds.

EasyLife.
Tried-and-tested solid steel components ensure a long service life and easy maintenance

EasyUse.
Well-organized controls, easy dismantling and maintenance combine to make the flotti very easy to handle.

D 10

TDS
Delivery volume:standard approx. 15 l/min (depending on the transport and mixing shaft)
Drive motor:2.2 kW, 230/400 V, 50 Hz
Electrical connection:230/400 V, 50 Hz, 1/3 ph
230/400 V, 50 Hz, 1/3 ph16/10 A
Connecting cable:3 x 2.5 mm² / 5 x 1.5 mm²
Connector:Domestic socket/ 16 A, 5p, 6h
Water supply:3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions:approx. 1700 x 440 x 470 mm
Weight:approx. 85 kg
Information

Mixer D10-III is the consistent development of our D10 mixer and once again attracts attention for its improved cleaning and mixing features. Thanks to the experience gathered with its tried and tested forebear, the D10, it has been possible to further optimize the D10-III for the demands of modern building sites. Thus, in addition to the processing of classic dry mortar products with granularity of up to 4 mm, it is also specially developed for fine-grained products with a high proportion of synthetic material, such as adhesives, bedding and leveling compounds or dry synthetic, silicate or silicon renders.

In order to cope with this wide range of products, the mixer uses our patented mixing principle, ensuring the best possible blending of the material. 

Mixer D10 is available in a 400 V or 230V version. In the 230V version, a frequency converter (FU) ensures the motor kept under powerful control.

Our patented mixing principle:
The D10 can process all standard dry mortar products up to a granularity of 4 mm. The technical highlight of the D10 is the transfer of material from the dosing area to the mixing area: the water is no longer sprayed onto the material as in the past, but instead the material is dosed according to a patented mixing principle, scattered into a tank of water and mixed.

EasyClean.
The use of PU components makes cleaning easier and means less caking than with similar metal components. The result: quick, residue-free cleaning.

EasyWork.
Uninterrupted operation with consistent mixing quality thanks to our intelligent machine technology. The separation of dry and wet areas enables a permanent constant ratio of dry material to water to be achieved.

EasyMix.
Our patented mixing system enables an extremely good mixing quality. In conjunction with the large mixing volume, the system guarantees the best possible blending, even with modern dry mortars.

EasyUse.
Well-organized controls, easy dismantling and maintenance and an intelligent transport solution combine to make the D10 very easy to handle.

EasyLife.

A combination of modern materials and our patent mixing system increase service life and extends service intervals.

Our specialist for: adhesives dry, bricklaying mortar, cement plasters, concrete, decorating plaster, enriched special mortars, fine concrete, finishing plasters, grout, lime cement plaster, lime gypsum plaster, lime plaster, loam products dry, reinforcing and adhesive mortars, restoration plaster, structured and decorative renders, thin layer gypsum and cement products.

Recommended accessories: Dry material probe, Transport screw, Protector to prevent dry running, Stand with filling hopper.

D 20

TDS
Delivery volume:standard approx. 20 l/min (depending on the transport and mixing shaft)
Drive motor:3ph - 2.2 kW, 230 (+/- 10%) V, 50 Hz
Electrical connection:220 V, 60 Hz
Fuse:16 A
Connecting cable:3 x 2.5 mm²
Connector:Schuko socket
Water supply:3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions:approx. 1700 x 700 x 1,000 mm
Weight:approx. 90 kg
Information

Mixer D20 is a robust allrounder for processing dry mortar products with a granularity of up to 4 mm. It is the bestselling mixer in this class and, depending on the version, rationalizes the processing of decorative renders, bricklaying mortar or fine concrete.

The 230V version specializes in the processing of decorative renders and thus is fitted with the versatile standard mixing chamber with plain bearing. It is also available in a 400V version which shows its prowess in the processing of heavy materials such as bricklaying mortar or fine concrete. In this case the ball bearing-mounted fine concrete mixing chamber is used.

The D20 is filled with bagged material as standard and offers impressively homogenous blending. The large material container is perfect for building sites. 


EasyUse.

Well-organized controls, easy dismantling and maintenance combine to make the D20 very easy to handle.

EasyLife.

Tried-and-tested solid steel components ensure a long service life and easy maintenance.

Recommended accessories: Water pump , Filter cap, Feeding cap, Insulating plaster mounting to increase the size of the material container, Flowmeter, Tarpaulin for material containe.

D 30

TDS
Delivery volume:standard approx. 30 l/min (depending on the transport and mixing shaft)
Drive motor:5,4ph - 4 kW, 400  V, 50 Hz
Electrical connection:400 V, 50 Hz
Fuse:16 A
Connecting cable:5 x 1.5 mm²
Connector:16A, 5p, 6h
Water supply:3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions:approx. 1,970 x 690 x 1,077 mm
Weight:approx. 220 kg
Information

The D30 is designed for mobility and ease of transport and features tried-and-tested m-tec technology. Fitted with a powerful 4,0 kW motor, it mixes even heavy products with ease.

The D30 is fed with bagged material as standard. The large material container guarantees professional working conditions. The optional filter cap means that the D30 can be fed by a conveyor system with ideal results.

EasyUse.
Well-organized controls, easy dismantling and maintenance combine to make the D20 very easy to handle.

EasyLife.

Tried-and-tested solid steel components ensure a long service life and easy maintenance. 

Applications: Construction chemicals, Rendering, Flooring, Masonry, ETICS, Plastering, Renovating.

Recommended accessories: Filter hood, Transport screw.

D 50

TDS
Conveying volume:approx. 50 l/min (depending on the transport and mixing shaft)
Drive motor:4 kW, 400 V, 50 Hz
Silo connection:ND 250
Dimensions:approx. 2100 x 350 x 350 mm
Weight:approx. 140 kg
Specifications S40
Electrical connection:400 V, 50 Hz, 3 ph
Fuse:16A
Connecting cable:5 x 1.5 mm²
Connector:16A, 5p, 6h
Water supply:3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions:depending on mode
Weight:depending on mode
Information

Mixer D50 is fitted with highly modern PU components that guarantee economically effective and efficient operation. It is designed to process dry mortar products with a granularity of up to 4mm and is found on numerous building sites throughout the world. The D50 is used with bricklaying mortar and insulating mortar, plasters, screeds and fine concrete.

Fitted with a powerful 4.0 kW motor it even mixes heavy products with ease. The direct mounting on the silo creates a compact unit that speeds up work on the building site whatever the weather.

EasyClean.
The use of PU components makes cleaning easier and means less caking than with similar metal components. The result: quick, residue-free cleaning.

EasyWork.
Uninterrupted operation with consistent mixing quality thanks to our intelligent machine technology. The separation of dry and wet areas enables a permanent constant ratio of dry material to water to be achieved.

EasyMix.
Our patented mixing system enables an extremely good mixing quality. In conjunction with the large mixing volume, the system guarantees the best possible blending.

EasyUse.
Well-organized controls, easy dismantling and maintenance and an intelligent transport solution combine to make the D50 very easy to handle.

EasyLife.
A combination of PU components and our patent mixing system increases service life and extends service intervals.

Our Specialist for: bricklaying mortar, cement plasters, cementitious self- levelling, concrete, decorating plaster, fine concrete, finishing plasters, floor screed, grout, lime cement plaster, lime gypsum plaster, lime plaster, loam products dry, restoration plaster, self levelling products, structured and decorative renders.

  • Recommended Accessories: Control panel S40, Mixing shafts, Transport screw, Blow-out device flowmeter tarpaulin for material container.

D 100 / D 150

TDS
Specifications  D100D150
Standard conveying volumeapprox. 100 l/min (depending on the transport and mixing shaft)approx. 150 l/min (depending on the transport and mixing shaft)
Drive engine:7.4 hp - 5.5 kW7,4 hp - 5.5 kW / 10hp - 7.5 kW
Electrical connection:400V, 50 Hz, 3 ph400V, 50 Hz, 3 ph
Fuse: 16Α16Α
Connecting cable:5 x 2,5 mm²5 x 2,5 mm²
Connector:16A, 5p, 6h16A, 5p, 6h
Water supply:3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions:2300 x 380 x 350 mm2350 x 400 x 350 mm
Weight:approx. 150 kgapprox. 150 kg
Information

With a conveying performance of 100 lt/min or 150 lt/min, mixer D100/D150 is certainly powerful. It is designed to process dry mortar products with a granularity of up to 6 mm and is found on numerous building sites throughout the world. The D100/D150 optimizes the processing of bricklaying and insulating mortar, plasters, screeds or fine concrete.

Fitted with a powerful 5.5 kW or 7.5 kW drive engine it mixes even heavy products with ease. The direct mounting on the silo creates a compact unit that speeds up work on the building site whatever the weather.

As is typical of all m-tec systems, the D100/D150 has easy and quick to use connector systems that enable important elements, such as the mixing chamber or mixer motor, to be replaced in just a few seconds.

The m-tec S100/S150 control panel is the control unit for mixer D100/D150. It can cope with every situation and a number of different versions are available in line with the performance of the continuous mixer. Starting from a hand-operated, economical basic model and ranging to a fully automatic version with remote control, timer and special control, the m-tec S100/S150 control panels meet every challenge a modern building site can produce.

EasyUse.
Well-organized controls, easy dismantling and maintenance combine to make the D100/D150 very easy to handle.

 EasyLife.
Tried-and-tested solid steel components ensure a long service life and easy maintenance.

Our Specialist for: bricklaying mortar, cement plasters, cementitious self- levelling, concrete, fine concrete, finishing plasters, floor screed, grout, lime cement plaster, lime gypsum plaster, lime plaster, loam products dry, self levelling products.

  • Recommended Accessories: Control panel S100/S150, Transport screw.

    • Applications: Construction chemicals, Rendering, Flooring, Masonry, ETICS.

Giga Mix

TDS
Electrical connection:400 V, 50 Hz
Drive motor:12 hp - 9 kW
Standard conveying volume:approx. 130 l/min (depending on the transport and mixing shaft)
Fuse:32Α
Connecting cable:5 x 4 mm²
Water Supply:3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Silo outlet:NM350
Dimensionsapprox. 3400 x 700 x 800 mm
Weightapprox. 590 kg
Information

The GIGA mixer is designed to process dry mortar products with a granularity of up to 8 mm and is found on numerous building sites throughout the world. It has been optimized for processing floor screed, bricklaying mortar or ready-mixed concrete in large volumes. It features particularly impressive mixing power, something that is required above all for the blending of industrial concrete in a wide variety of qualities. It is now frequently used in large-scale repairs on bridge structures with synthetic modified dry mortars and concretes.

Fitted with a powerful 9.0 kW motor it mixes large quantities of even heavy products with ease. The direct mounting on the silo creates a compact unit that speeds up work on the building site whatever the weather. 

The use of PU components in the mixing chamber reduces the effort required for cleaning purposes. In addition, these modern building materials increase service life and eliminate any chance of corrosion.

The individually interchangeable mixing blades enable the GIGA-mix to be adapted to almost any product - an advantage that should not be underestimated in view of the wide variety of products used today. To ensure the perfect blending of dry mortar products, the GIGA-mix mixer also uses our patented mixing system. 

EasyClean.
The use of the latest materials means easy cleaning and less susceptibility to caking than with metal. The result: quick, residue-free cleaning.

EasyWork.
Uninterrupted operation with consistent mixing quality thanks to our intelligent machine technology. The separation of dry and wet areas enables a permanent constant ratio of dry material to water to be achieved.

EasyMix.
Our patented mixing system enables an extremely good mixing quality. In conjunction with the large mixing volume, the system guarantees the best possible blending.

EasyUse.
Well-organized controls, easy dismantling and maintenance, the individually interchangeable mixing blades and flow chart control system combine to make the GIGA-mix very easy to handle.

EasyLife.
A combination of PU components and our patent mixing system increases service life and extends service intervals.

Conveying Systems.

F 100 / 140

TDS
Specifications:F100F140
Compressor:approx. 100 m³/happrox. 140 m³/h
Drive motor:5.5 kW, 400 V, 50 Hz7.5 kW, 400 V, 50 Hz
Electrical connection:400 V, 50 Hz, 3 ph400 V, 50 Hz, 3 ph
Fuses:16 A25 A
Connecting cable:5 x 2.5 mm²5 x 4.0 mm²
Connector:16A, 5p, 6h32A, 5p, 6h
Dimensions:approx. 1050 x 550 x 650 mmapprox. 1050 x 550 x 650 mm
Weight:220 kg230 kg
Information

As a powerful unit, the m-tec F100/140 pneumatic conveyor system with pressure silos set standards for the feeding of application devices, such as the duo-mix mixing pump.
Even over the long distances found on large building sites or in multi-storey construction projects, the F100/140 can be used for the pneumatic conveyance of all typical premixed dry mortar products - in particular interior and exterior plaster, but also bricklaying mortar. 

The F100/140 does away with the need for the time-consuming unloading, carrying, opening and emptying of bagged material because it transports the product through its sealed system directly from the silo to the application machine. A continuous material flow and very high conveying performance are just as much taken for granted as a rational, clean way of working. The tried-and-tested conveyor system needs no intervention from personnel when it comes to the continuous feeding of processing machinery.

As a very well equipped version, the F100+/F140+ offers the conveying system a fully automatic mode that has rational details such as the monitoring of the rotational direction or automatic emptying of conveying hoses in addition to features such as silo monitoring and regulation.

Conveyor system F is available in a portable version, a mobile trailer-mounted version or as a block conveyor system mounted on the silo.

EasyWork.
The numerous applications for dry bulk materials and compatibility with all standard plastering machines or continuous mixers make work easy.

EasyUse.

Together, the clearly laid out controls, automatic compressor deactivation and compact conveyor block make the F series system easy to use.

EasyLife.
The use of an oil-free claw compressor increases service life and reduces the need for replacement parts.

Highlights F100+/F140+

Automatic silo pressure monitoring
Control of silo pressure by the compressor, which can regulate pressure to a set ideal value if necessary.

Automatic conveying pressure control
Automatic detection of the state of the material in the delivery hoses - regulation in critical situations by blowing the hoses free.


Automatic emptying of delivery hoses
In the event of a power failure, fully automatic utilization of the available air in the pressure silo to blow the delivery hoses free.

Operating hours counter
Integrated in the control panel to monitor maintenance intervals.

Rotational direction monitor with warning lamp
Ensures that the compressor runs in the correct processing direction.

Areas of use and applications: Machine gypsum plasters, Lime gypsum plasters, Cement plasters, Lime plasters, Lime cement plasters, Bricklaying mortar, Bulk materials, Aggregates, Powdered material.

Hurrican.

TDS
Specifications:Ηurrican 100Hurracan 140
Compressor:approx. 100 m³/happrox. 140 m³/h
Drive motor:5.5 kW, 400 V, 50 Hz7.5 kW, 400 V, 50 Hz
Electrical connection:400 V, 50 Hz, 3 ph400 V, 50 Hz, 3 ph
Fuses:16 A20 A
Connecting cable:5 x 2.5 mm²5 x 4.0 mm²
Connector:16A, 5p, 6h32A, 5p, 6h
Dimensions:approx. 1050 x 550 x 650 mmapprox. 1050 x 550 x 650 mm
Weight:235 kg245 kg

Pressure pot:

Silo connection:ND 250ND 250
Rotary drive:0.18 kW, 400 V, 50 Hz0.18 kW, 400 V, 50 Hz
Dimensions:600 x 600 x 1,020 mm600 x 600 x 1,020 mm
Weight:approx. 105 kgapprox. 105 kg
Information

The m-tec hurrican conveyor system is used in combination with gravity-flow silos or containers for feeding application devices, such as the M300 mixing pump.
This means that the m-tec hurrican conveyor system is the ideal entry level system for modern application technology.  

The hurrican does away with the need for the time-consuming unloading, carrying, opening and emptying of bagged material because it transports the product through its sealed system directly to the application machine. Performance can be increased even further by adding an optional auxiliary compressor, enabling even heavy products to be transported over long distances.

The hurrican can also be extended to enable bagged material to be processed. An optional vacuum device is used to filter the dust that is normally created and thus ensures rational, clean running. 

The hurrican conveyor system is available in a portable version, a mobile trailer-mounted version or as a block conveyor system mounted on the silo.

EasyWork. 
The numerous applications for dry bulk materials and compatibility with all standard plastering machines or continuous mixers make work easy.

EasyUse.

Together, the clearly laid out controls, automatic compressor deactivation and oil-free claw compressor make the hurrican system easy to use. 

EasyLife.
The use of an oil-free claw compressor increases service life and reduces the need for replacement parts.

G 140

TDS

Specifications

G140G160
Compressor:approx.140m³/happrox. 160m³/h
Drive motor:7,5 kW, 400V, 50Hz9kW, 230/ 400V 60Hz
Electrical connection:400V, 50 Hz, 3ph230V, 60Hz, 1ph
Fuse:25A63A
Connecting cable:5×4,0mm²5×4,0mm²
Connector:32A, 5p, 6h63A 3pol 6h
Dimensions:H:650 / L:530 / W:1030H:710 / l:640 / W:1130
Weight:215kg240kg
Pressure potG140G160
Silo connection:ND250ND250
Rotary drive:0,18kW, 400V, 50 Hz0,18kW, 230V, 60Hz, 3ph
Dimensions:H:985 / W:685 / L:995H:985 / W:685 / L:995
Weight:125kg125kg
Information

 The new G140 pneumatic conveying system features optimised technology that can pneumatically transport conventional premixed dry mortar products (interior and exterior plasters, bricklaying mortars) over distances that previously were the sole domain of pressurized silos.

An additional convincing feature of the G140 is its ease of handling. Thanks to its “smart solution”, conveying air now no longer needs to be set manually to each product and conveying distance.

The G140 knows automatically how much conveying air is needed and regulates it accordingly. The conveying capacity can be increased even further with an optional auxiliary compressor, when even heavier products can be transported over large distances.

The G140 does away with the need for the time-consuming unloading, carrying, opening and emptying of bagged material because it transports the product through its sealed system directly from the silo to the application machine.

The G140 conveyor is available as a portable version, for mounting in a trailer, or as a compact unit for silo installations.

EasyWork.
The numerous applications for dry bulk materials and compatibility with all standard plastering machines or continuous mixers make work easy.

EasyUse.

Together, the clearly laid out controls, automatic compressor deactivation and oil-free claw compressor make the hurrican system easy to use. 

EasyLife. 
The use of an oil-free claw compressor increases service life and reduces the need for replacement parts. 

Our Specialist for: Adhesives dry, Bricklaying mortar, Cement plasters, Finishing plasters, Floor screed, Lime plasters, Lime cement plasters, Lime gypsum plaster reinforcing and adhesive mortars.

  • Applications: Construction chemicals, Rendering, Flooring, Masonry, ETICS.

Product added to wishlist
Product added to compare.

By continuing to use the website, you agree to the use of cookies.