SMALL BUT POWERFUL!
The mono-mix is available in two versions: 230 Volt or 400 Volt. In the 230 Volt version a frequency converter ensures that optimum performance can be achieved at any time: this is a huge advantage on building sites with a 230V power supply, e.g. during refurbishment projects or interior work.
The mono-mix is a compact, easy-to-use mixing pump and is perfectly suited to the processing of all machine-mixable interior and exterior plasters, as well as for adhesives and reinforcing mortar. The mono-mix can be used both with bagged material as well as soft materials.
The pump has four convenient output settings, enabling it to be adjusted to the relevant material. An optional after mixer is available for materials that are difficult to mix.
The transparent layout of the controls and the conscious avoidance of superfluous switches make for simple operation.
The large wheels mean that the mixer can be transported with ease at all times. In addition, the monomix can be dismantled into three troublefree components on the building site in just a few simple steps.
As is typical of all m-tec systems, the mono-mix has easy and quick to use tensioning wedges, enabling important elements such as the worm pump or material container to be replaced in just a few seconds.
The simple but logical structure enables the mono-mix to be cleaned quickly
The powerful drive technology of the mono-mix ensures there is always enough power for challenging tasks, even in the 230 Volt version.
Together, clearly structured controls, 3-way dismantling, easy transport by crane and large wheels make the mono-mix easy to handle.
Areas of use and applications
All pumpable dry mortars, such as
• Gypsum plasters
• Lime gypsum plasters
• Cement plasters
• Lime plasters
• Lime cement plasters
• Insulating plasters
• Finishing plasters
• Plaster for restoration
• Reinforcing mortar and adhesive mortar
• Floor screeds
• Levelling Compound
|Standard delivery volume||approx. 5-20 l/min
variable with other worm pumps
|Conveying distance:*||up to 20 m|
|Delivery pressure:*||up to 20 bar|
|Drive motor:||3,0 kW|
|Electrical connection:||230 V, 60 Hz, 2 ph|
|Compressed air supply:||1,1 kW, approx. 250 l/min, 4 bar|
|Connecting cable:||3 x 25 mm²|
|Connector:||Nema L6-20A, 3-pol|
|Water pump:||TM61E, 230V 60 Hz|
|Water supply:||3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running|
|Dimensions:||approx. 1430 x 670 x 1.150 mm|
|Weight:||approx. 160 kg
Our Specialist for:
- adhesives dry
- cement plasters
- cementitious self- levelling
- decorating plaster
- finishing plasters
- floor screed
- flowing screeds
- gypsum plaster
- lime cement plaster
- lime gypsum plaster
- lime plaster
- loam products dry
- reinforcing and adhesive mortars
- restoration plaster
- self levelling products
- structured and decorative renders
- thin layer gypsum and cement products
- Construction chemicals
- Mortar hoses
- Fine plaster spray gun
- Adhesive gun
- After mixer
- Stator m-tec D8-2 self-adjusting Shore 62º
- Rotor m-tec D8-2
- Stator m-tec D8-1,5 mono-star Shore 63º
- Rotor m-tec D8-1,5 mono-star
- Rotor m-tec m-tec star
- Rotor m-tec m-tec star
- Rotor m-tec uni-star 0,5
- Stator m-tec m-tec star self-adjusting Shore 71º
*for reference only.